| |
Central
Exchange
The
central exchange is the heart of the communication system. It is used
for the exchange function according to the stored connection program
as well as for the exchange of data between digital and analog stations.
- Management
of up to 192 digital or analog intercom stations
- Simultaneous
exchange of up to 96 communication links
- LED's
to indicate operation, data transmission and errors
- Operating
system and connection diagram stored in flash EEPROM
- RS
232 service interface
- Loading
and reading out of configuration program via the service interface
- Provision
for Dual/triple redundancy
- Permanent monitoring for connected stations and connection cables
|
 |
Digital
Outdoor Intercom Station
These
stations form an essential part of the communication system. They are
especially designed for areas with high levels of dust, noise, heat
and cold.
These stations are also available as Explosion Proof models.
- Glass
fibre reinforced polyester housing, IP 65
- Modular design for easy maintenance
- Up to 3 bi-directional rotary switches to set up communication links
- Call or busy indication by LED
- Noise compensated microphone
- Potential free relay point
|
 |
Digital
Desktop Intercom Station
Designed
for use in control stations, measuring stations, command rooms, etc.
Despite their compact size, they provide a 2-key dialing keyboard with
display and 12 direct call buttons with signal lamps. Available in different
models for up to 48 keys. Also available in flush mounting model
- Dialing to any station
- Call
and busy indication by LED
- Noise
compensated goose neck microphone
|
 |
Digital
Service Intercom Station
The
service station is used for the output of errors diagnosed by the central
exchange as well as to test the connections to all stations of an INTRON-D
system.
- Indication
of the actual error message
- Dialing to any station via the numeric keys
- Menu
driven operation via control keys
- Call
and busy indication by LED
- Noise
compensated goose neck microphone
|
 |
Loudspeakers
For
applications where intercom stations are not required or additional
output is required at the intercom station, loudspeakers can be used.
These
are available in weatherproof Aluminum, ABS or plastic in ranges of
10-25W
Also available as Explosion proof in Aluminum or plastic from 8-25W
Wall/ceiling
mounted loudspeakers are available for installation in control rooms,
etc.
|
 |
Application
Manager
The
Application Manager is used to set up the connection diagram. It can
be used for:
- Definition
of the system configuration
- Timer
definition
- Definition
of the loudspeaker groups
- Definition
of group calls
- Definition
of stations
|